Will 235/60r17s fit on a 6th gen Monte SS ?
Thinking of putting 235/60r17s on my Monte SS.. Will these fit or will I need spacers for them ? Worried about the strut tower on the rears... Please let me know if you have this tire size... Thanks...mjclemm..
I have 225/55R17's at all 4 corners, they are the biggest tire size that will fit on the rear without rubbing and they are still very close. Anything bigger will require spacers. Evan the stock size tires were a very close fit in the rear. My car is an LT.
Last edited by ssdriver; Jun 9, 2013 at 01:53 PM.
There was 245/30r22s on my car when I bought it. Rubbing was the least of my problems. I downgraded to 245/45R18s all around no spacers, no rubbing, pics in garage. There are other members who are riding on 20s. But 245 is the widest you wanna go. You can go to the below website to compare your stock wheel size to the size you want. It'll even tell you how fast you are going on the new tires compared to the old. Good luck!
225/60-R16 vs 245/40-R19 Tire Comparison - Tire Size Calculator
225/60-R16 vs 245/40-R19 Tire Comparison - Tire Size Calculator
Last edited by JC Colon; Jun 9, 2013 at 07:20 AM.
I'm running 255/50/16's and did get rubbing against my rear control arms. We ended up putting 1/4" spacers at the control trailing arm mounts to push them inboard away from the tires. The front never had rub issues.
Last edited by ZIPPY02; Jun 9, 2013 at 01:59 PM.
Are those the dake jr replica rims? Mine with 235 55 r17s rubbed the rear strut plate bad. I ended up hitting mine with a hammer for a while and used some 5mm spacers. They fit fine now.
Thanks for all the input... Much appreciated ...mjclemm...














