7th Gen ('06-'07): MistreSS Headlight Project
Thread Starter
|
Monte Of The Month -- November 2012
Monte Of The Month -- August 2015
Monte Of The Month -- August 2015
Joined: Aug 2011
Posts: 4,793
From: Ann Arbor, Michigan
Thanks again guys! Yeah just trying to gloss the bezel.
Here's the finished product for both versions of driver side bezels, fine sanded (1500 grit) and buffed. Took me forever to buff them by hand but the work was worth it. Both passenger side bezels were cleared this morning and those are curing right now. I'll finish up the passenger bezels tomorrow.
Here's the finished product for both versions of driver side bezels, fine sanded (1500 grit) and buffed. Took me forever to buff them by hand but the work was worth it. Both passenger side bezels were cleared this morning and those are curing right now. I'll finish up the passenger bezels tomorrow.
Last edited by 06mistreSS; Mar 30, 2013 at 08:25 PM.
can't decide which I like better 
Thread Starter
|
Monte Of The Month -- November 2012
Monte Of The Month -- August 2015
Monte Of The Month -- August 2015
Joined: Aug 2011
Posts: 4,793
From: Ann Arbor, Michigan
Yeah honestly at this point I can't decide either. Thanks Frank, Dave!
Working on buffing the passenger sides this morning; sit down with a rag and compound in one hand and coffee in the other. I think both driver sides took me about 3+ hours to buff out.
Working on buffing the passenger sides this morning; sit down with a rag and compound in one hand and coffee in the other. I think both driver sides took me about 3+ hours to buff out.
Thread Starter
|
Monte Of The Month -- November 2012
Monte Of The Month -- August 2015
Monte Of The Month -- August 2015
Joined: Aug 2011
Posts: 4,793
From: Ann Arbor, Michigan
I finished buffing the passenger side clear reflector bezel yesterday. Still have the blacked out passenger side bezel to buff. Three down, one to go.
