driver tail light
#1
driver tail light
I have a problem with my driver tail light. It is loose at the top and still connected at the bottom. I can pull it away from the car at the top and see behind the housing, but it stays connected at the bottom. I have also noticed that when I wash the car, moisture gets in the lens and fogs up. I believe that it needs to be attached at the top, or the whole housing needs replacement. does any one have any ideas?
Doug
dm2willi@oakland.edu
Doug
dm2willi@oakland.edu
#4
RE: driver tail light
same thing happened on mine... except, the plastic part of the housing that contains the threads actually broke off... the plastic nut still had the threads and piece of housing in it... I took everything apart and superglued the threads/housing piece back together with the housing, and so far, so good.
Thread
Thread Starter
Forum
Replies
Last Post
gtpshawty
PRIVATE Wanted Classifieds
3
09-13-2013 03:29 AM
shock081
Monte Carlo Repair Help
1
07-14-2010 09:00 PM