Monte metcalf , Today 01:35 AM
I don’t need to know measurements or whatnot will somebody please take a 1/2 standard socket and see which way adjusts the headlight which way. I put LEDS in and the adjuster is so far up that the dust cover won’t fit on one side, fits on the other and it’s aimed fine but the drivers side is too high latched into the adjustment deal and when it unseats from the adjuster deal it Just looks straight down. The screws are busted so I’m stuck with just the nut. Is tighten on a ratchet up or down that’s all I need to know.

 

I put new housings in mine a year ago and they were all over the place and after studying the the service manual and looking how I did it. I found a bracket that had a slot in it that the housing had to be in. Solved the issue.
I don't know if you have access to a service manual but that might be a resource. Also google it and there might be something there in a video.