new from canada
Thread Starter
|
Joined: Oct 2013
Posts: 4
new from canada
hi everyone im new here im from ontario canada i have a 2000 monte ss that needs some work im new to the monte carlo and have some questions about my car.
here it is
whats this harness plug too? the wires are broken
what size bolts do i need for the front engine mounts to rad support? im missing all 4
here it is
whats this harness plug too? the wires are broken
what size bolts do i need for the front engine mounts to rad support? im missing all 4
Joined: Apr 2010
Posts: 12,590
From: Mentor, Ohio
The bolts you asked about are the same size as the top bolts for those brackets. I replaced my rusty ones with stainless bolts.
The connector I believe leads to the coolant temp sensor that is in the lower intake, just under where the t-stat sits. If I'm right, you probably are not getting an accurate temp reading as the yellow wire looks broken....
The connector I believe leads to the coolant temp sensor that is in the lower intake, just under where the t-stat sits. If I'm right, you probably are not getting an accurate temp reading as the yellow wire looks broken....
Monte Of The Month -- February 2014
Joined: Oct 2010
Posts: 1,715
From: British Columbia, Canada
Welcome fellow Canuck... No worries, your excellent ride potential will be realized in no time... Excellent forum and Excellent people... I was originally from Ontario, Brampton... Where are you located?... Take care,
