Timing 3.8[229]
#1
Timing 3.8[229]
I bought my 84 monte the other day and found out today that the dizzy is loose[turn it by hand] This would hopefully fix my bad idle. Now can anyone tell me how to set it back to stock. Like i said in my intro thread i was out of chevy's for 13years and lost some knowledge lol
#2
RE: Timing 3.8[229]
ORIGINAL: tiny4lx
I bought my 84 monte the other day and found out today that the dizzy is loose[turn it by hand] This would hopefully fix my bad idle. Now can anyone tell me how to set it back to stock. Like i said in my intro thread i was out of chevy's for 13years and lost some knowledge lol
I bought my 84 monte the other day and found out today that the dizzy is loose[turn it by hand] This would hopefully fix my bad idle. Now can anyone tell me how to set it back to stock. Like i said in my intro thread i was out of chevy's for 13years and lost some knowledge lol
#4
RE: Timing 3.8[229]
yeah i would say that is what he is talking about.
1. take out number 1 spark plug
2. bring it back up to T/D/C
3. pull dist. cap see wher eit is linig up to . the roter should be pointing to the number one plug.
if it is the vac. advance should be almost pointing to the front side of the block on the pax side.
if it is tighten up to where you can still move it but so it is not real lose.
put it back togeather and fire it up. this puts you in the genral area to where you should be.
Now take a timming light and shoot it down to the crank and set it to where the lines are about 3deg. before TDC
it has been a long time so i would check a manual for actual timeing on it as far as before or after tdc and the deg.
but that should get you to a ball park area to start with it.
Good luck
1. take out number 1 spark plug
2. bring it back up to T/D/C
3. pull dist. cap see wher eit is linig up to . the roter should be pointing to the number one plug.
if it is the vac. advance should be almost pointing to the front side of the block on the pax side.
if it is tighten up to where you can still move it but so it is not real lose.
put it back togeather and fire it up. this puts you in the genral area to where you should be.
Now take a timming light and shoot it down to the crank and set it to where the lines are about 3deg. before TDC
it has been a long time so i would check a manual for actual timeing on it as far as before or after tdc and the deg.
but that should get you to a ball park area to start with it.
Good luck
#5
RE: Timing 3.8[229]
ORIGINAL: SLJ2137694
What is a "DIZZY"?
ORIGINAL: tiny4lx
I bought my 84 monte the other day and found out today that the dizzy is loose[turn it by hand] This would hopefully fix my bad idle. Now can anyone tell me how to set it back to stock. Like i said in my intro thread i was out of chevy's for 13years and lost some knowledge lol
I bought my 84 monte the other day and found out today that the dizzy is loose[turn it by hand] This would hopefully fix my bad idle. Now can anyone tell me how to set it back to stock. Like i said in my intro thread i was out of chevy's for 13years and lost some knowledge lol
Ummm tell me your kidding lol. Distributor is what i meant[dizzy is just me being lazy]
#6
RE: Timing 3.8[229]
ORIGINAL: tiny4lx
Ummm tell me your kidding lol. Distributor is what i meant[dizzy is just me being lazy]
ORIGINAL: SLJ2137694
What is a "DIZZY"?
ORIGINAL: tiny4lx
I bought my 84 monte the other day and found out today that the dizzy is loose[turn it by hand] This would hopefully fix my bad idle. Now can anyone tell me how to set it back to stock. Like i said in my intro thread i was out of chevy's for 13years and lost some knowledge lol
I bought my 84 monte the other day and found out today that the dizzy is loose[turn it by hand] This would hopefully fix my bad idle. Now can anyone tell me how to set it back to stock. Like i said in my intro thread i was out of chevy's for 13years and lost some knowledge lol
Ummm tell me your kidding lol. Distributor is what i meant[dizzy is just me being lazy]
#8
RE: Timing 3.8[229]
ORIGINAL: tiny4lx
If you dont have any sense of humor please dont reply to my post. Its funny how others know what im talking about,but you dont
If you dont have any sense of humor please dont reply to my post. Its funny how others know what im talking about,but you dont
#9
RE: Timing 3.8[229]
No lets not drop it. Look you came on my thread with your stupid *** comments with no help at all. I do know what im talking about and others aswell cause they had a response. Sorry your old *** isnt with the new age.
Maybe with all this "know how" you should start your own web site. Now go play PEE-KNUCKLE with the other old folks and stay off my thread.
Maybe with all this "know how" you should start your own web site. Now go play PEE-KNUCKLE with the other old folks and stay off my thread.