Monte Carlo Repair Help Have a Monte problem and need help? Good at troubleshooting? Discuss it here!

Need Help Diagnosing New Problem

Old Jan 27, 2012 | 03:43 PM
  #1  
Sparky-88's Avatar
Thread Starter
|
5 Year Member3 Year Member1 Year Member
Joined: Aug 2010
Posts: 1,136
From: Huntsville, AL
Default Need Help Diagnosing New Problem

Ok Motorheads, hopefully someone can point me in the right direction for a new problem with our ’02 Monte.

Recently it’s started making a noise, seems to be from the front end, primarily upon deceleration. It sounds like what I would term a ‘gear noise’. Not very loud, but definitely not normally there. It is proportional to speed: as the car slows down, the noise goes down at the same pace. Seems like it is drivetrain related. I’ve checked all the fluids – oil, tranny, power steering, brake – all normal. The only thing I can see out of the ordinary is a little dripping that wasn’t there before. It looks like a very slow drip from somewhere near the front left (driver’s side). I haven’t identified the source. Dark fluid (darker than the engine oil), oily, smells like gear oil.

Engine has about 159K miles; tranny about 70K miles on it. Front end has never had any issues. Hubs are original.

Any thoughts?
 
Old Jan 27, 2012 | 03:50 PM
  #2  
DRuben's Avatar
Joined: Dec 2010
Posts: 677
From: Baton Rouge, Louisiana
10 Year Member
Default

Originally Posted by Sparky-88
Ok Motorheads, hopefully someone can point me in the right direction for a new problem with our ’02 Monte.

Recently it’s started making a noise, seems to be from the front end, primarily upon deceleration. It sounds like what I would term a ‘gear noise’. Not very loud, but definitely not normally there. It is proportional to speed: as the car slows down, the noise goes down at the same pace. Seems like it is drivetrain related. I’ve checked all the fluids – oil, tranny, power steering, brake – all normal. The only thing I can see out of the ordinary is a little dripping that wasn’t there before. It looks like a very slow drip from somewhere near the front left (driver’s side). I haven’t identified the source. Dark fluid (darker than the engine oil), oily, smells like gear oil.

Engine has about 159K miles; tranny about 70K miles on it. Front end has never had any issues. Hubs are original.

Any thoughts?
Cv axle, boot possibly leaking fluid. Thats my guess...
 
Old Jan 27, 2012 | 04:23 PM
  #3  
nitehawkjcb's Avatar
Monte Of The Month -- April 2012
Monte Of The Month -- December 2014
10 Year Member5 Year Member3 Year Member1 Year Member
Joined: Sep 2008
Posts: 3,211
15 Year Member
Default

Could be a wheel bearing going bad
 
Old Jan 27, 2012 | 04:36 PM
  #4  
Sparky-88's Avatar
Thread Starter
|
5 Year Member3 Year Member1 Year Member
Joined: Aug 2010
Posts: 1,136
From: Huntsville, AL
Default

Thanks, guys. I'll crawl under it tomorrow and see if the CV axle boot is the source of the leak. And I need to look at my maintenance manual tonight to see how tough both of those jobs would be. Never had to mess with either yet.
 
Old Jan 27, 2012 | 06:46 PM
  #5  
forgotten's Avatar
Joined: Jan 2012
Posts: 133
Default

can you describe the sound any more? how does the coolant level look?
 
Old Jan 27, 2012 | 11:54 PM
  #6  
tj4ndirish's Avatar
Joined: Oct 2005
Posts: 47
Default

Originally Posted by Sparky-88
Thanks, guys. I'll crawl under it tomorrow and see if the CV axle boot is the source of the leak. And I need to look at my maintenance manual tonight to see how tough both of those jobs would be. Never had to mess with either yet.
CV boot and bearings should be nice and easy. An hour on both sides for each job.
 
Old Jan 28, 2012 | 06:39 AM
  #7  
ChibiBlackSheep's Avatar

Monte Of The Month -- August 2014
10 Year Member5 Year Member3 Year Member1 Year Member
Joined: Sep 2008
Posts: 25,145
From: Southeast PA
15 Year Member
Default

Very possible it is a bearing, I put my walkthrough from last week in the 6th gen How-to
 
Old Jan 28, 2012 | 07:01 AM
  #8  
SupplySgt's Avatar
Joined: Sep 2011
Posts: 3,635
From: Central Oklahoma
5 Year Member
Default

I was thinking bearing as well. Good luck on finding out what's wrong.
 
Old Jan 28, 2012 | 11:45 PM
  #9  
Sparky-88's Avatar
Thread Starter
|
5 Year Member3 Year Member1 Year Member
Joined: Aug 2010
Posts: 1,136
From: Huntsville, AL
Default

Thanks, guys. I had a look today and didn't see anything out of the ordinary. No leaks apparent from the axle boots. Since it's my wife's daily driver, I may get some diagnosing help early next week from a local shop.

Mike - I'll check out your write-up on the bearings.
 
Old Jan 31, 2012 | 08:49 AM
  #10  
Sparky-88's Avatar
Thread Starter
|
5 Year Member3 Year Member1 Year Member
Joined: Aug 2010
Posts: 1,136
From: Huntsville, AL
Default

Shop says passenger side hub assembly / bearing is bad. Going to let them do this repair. I don't have the time to tackle it.

Also discovered that my lower intake gasket has a tiny leak. Crap... I replaced upper / lower intake manifold gaskets last year. But the lower gasket gave me significant grief; I had a hard time getting it seated properly. First time doing that job; learned a lot. So I suppose it's not a big surprise that it has a problem. I just dread doing it all over again. At least this time I know better what I'm doing. Ugh...

The only good news is that the lower gasket leak may be causing the P0171 code (Bank 1 too lean) that keeps popping up periodically. Would be nice to get rid of that once and for all.
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:59 AM.