Homelink questions...
Thread Starter
|
Joined: Feb 2015
Posts: 3
Homelink questions...
New guy here with a 2005 Monte Carlo & have some questions on programming the Homelink remote for my new garage door opener.
Following the directions in owner's manual, I've held the 1st button in until it starts to flash, once that starts I've taken garage door remote & holding it close to the Homelink transmitter, held in the button until Homelonk starts flashing quickly & then released them both. Since door has a rolling code, I put the opener in learn mode & start pressing button on Homelink, but nothing happens past that! Car is out in the driveway in front of garage, so I'm hoping distance is not a problem! Door is a Chamberlain HD520EV.
Any suggestions?
Thanks!
Following the directions in owner's manual, I've held the 1st button in until it starts to flash, once that starts I've taken garage door remote & holding it close to the Homelink transmitter, held in the button until Homelonk starts flashing quickly & then released them both. Since door has a rolling code, I put the opener in learn mode & start pressing button on Homelink, but nothing happens past that! Car is out in the driveway in front of garage, so I'm hoping distance is not a problem! Door is a Chamberlain HD520EV.
Any suggestions?
Thanks!
THE JUDGE
Monte Of The Month -- November 2015
Monte Of The Month -- March 2012
Monte Of The Month -- November 2015
Monte Of The Month -- March 2012
Joined: Apr 2006
Posts: 13,335
From: Wauconda, IL
Does you garage door opener have a limit as to how many remotes that can access it? Also I've had success with using another remote that came with the opener to program homelink. I think that is how I programed my Mustang's home link.
Thread
Thread Starter
Forum
Replies
Last Post
jthorpe
Interior/Audio/Visual Electronics
0
Jan 20, 2012 07:14 AM
rayray
Interior/Audio/Visual Electronics
0
Feb 2, 2011 04:50 PM
