6th Gen ('00-'05): High Beam warning and turn signal problem

Reply Subscribe

Thread Tools

Search this Thread

Aug 14, 2019 | 12:14 PM

#11

FatalcMCSS

Joined: Mar 2013

Posts: 58

Quote:

Originally Posted by DAVESS2002

Either way should work, I stripped about 1/2 inch of the insulation off of both wires and twisted the ends together to hold it better when I put the connector on. That keeps the small wire from coming loose later if your crimp isn't tight enough.

Okay cool. Will fix tonight or tomorrow morning. The terminal I have is a 1/4 weatherproof heat shrink one, so hopefully that helps after I fix and heat it

Aug 15, 2019 | 11:06 AM

#12

FatalcMCSS

Joined: Mar 2013

Posts: 58

I don't know how GM made this, but if you look closely at the factory terminal, it looks like 2 pieces fused for the connection..it's weird and I need help lol

Finished product..but High Beam Out light still comes on..

Quote:

Originally Posted by DAVESS2002

So I put on the terminal just like we talked about..and High Beam Out message still comes on smh. I don't know what to do now..When I took the factory connector off, it looked like it was 2 pieces mashed together for each wire..would it work if I stack the terminals? Put one wire in it's own connector, crimp, then bolt back??