HELP ME PLEASE: Battery removal 2006 S.S.
Thread Starter
|
Monte Of The Month -- May 2013
Joined: Oct 2010
Posts: 4,389
From: Albertville MN
HELP ME PLEASE: Battery removal 2006 S.S.
ok. I thought this would be about a 20 min job to remove the old battery and put in a New one 
ARE YOU freakin kiddin me. Holy crap Batman I can't even figure out how to get the old one past the fuse block on the shock tower !! Can someone PLEASE give me a few hints on how to do this ? Its a V8 2006 SS. man I need help badly! Thanks for any short cuts or help you can give me. Rick
ARE YOU freakin kiddin me. Holy crap Batman I can't even figure out how to get the old one past the fuse block on the shock tower !! Can someone PLEASE give me a few hints on how to do this ? Its a V8 2006 SS. man I need help badly! Thanks for any short cuts or help you can give me. Rick
Last edited by Space; Dec 12, 2012 at 03:39 PM.
From Mitch...Prior Post
https://montecarloforum.com/forum/ge...ed-help-31946/
^ Click above for the link to this subject ~> GOOD LUCK
11-05-2011, 12:07 PM
trewyn15 
Monte Of The Month -- September 2010
2004 Chevrolet Monte Carlo
Join Date: Aug 2009
Location: Wisconsin
Posts: 8,130
pull the wires off, neg first then pos.
then remove the fender brace, there will also be a bolt on the engine side of the battery that you need to loosen because it holds in the battery, once those are all off just pull the battery out
trewyn15 Monte Of The Month -- September 2010
2004 Chevrolet Monte Carlo
Join Date: Aug 2009
Location: Wisconsin
Posts: 8,130
pull the wires off, neg first then pos.
then remove the fender brace, there will also be a bolt on the engine side of the battery that you need to loosen because it holds in the battery, once those are all off just pull the battery out
^ Click above for the link to this subject ~> GOOD LUCK
Monte Of The Month -- August 2014
Joined: Sep 2008
Posts: 25,145
From: Southeast PA
It's a VERY tight fit for the LS4.
I had removed the face of the fuse box and moved it as much as I possibly could, and it was a matter of tilting the battery very carefully and trying to maneuver it out.
I had removed the face of the fuse box and moved it as much as I possibly could, and it was a matter of tilting the battery very carefully and trying to maneuver it out.
Hi Rick, found the below & it's for an Impala S.S., but it should be the same...They don't build cars for us to work on..
Good Luck.....I hope the below helps
How to Remove a Battery From a 5.3L 2007 Impala
Good Luck.....I hope the below helps
How to Remove a Battery From a 5.3L 2007 Impala
Read more: How to Remove a Battery From a 5.3L 2007 Impala | eHow.com How to Remove a Battery From a 5.3L 2007 Impala | eHow.com
How to Remove a Battery From a 5.3L 2007 Impala | eHow.com
Thread Starter
|
Monte Of The Month -- May 2013
Joined: Oct 2010
Posts: 4,389
From: Albertville MN
Battery question & help
Ok nsit back and read this. I need your help. My 06 SS V8. Well the battery is dead. I bought a new one and want to take the old one out! That where the PROBLEM IS
.. Took the brace off. and took the fuse block loose on the shock tower. But can't move it enough to get the battery out of there. Now theres got to be a trick to getting that thing out of there PLEASE! Has anyone ever did this before ? HELP.....Someone. Or just shoot this oldman
Thanks Rick
.. Took the brace off. and took the fuse block loose on the shock tower. But can't move it enough to get the battery out of there. Now theres got to be a trick to getting that thing out of there PLEASE! Has anyone ever did this before ? HELP.....Someone. Or just shoot this oldman Thanks Rick
Monte Of The Month -- August 2012
Joined: Apr 2011
Posts: 6,074
From: Seattle
Disconnect the negative battery cable
Remove the right front diagonal brace
Reposition the positive battery cable terminal cover (1)
Loosen the positive battery cable terminal nut
Remove the positive battery cable terminal from the battery
Remove the battery retainer bolts (1) and retainer (2)
Remove the battery
Thread Starter
|
Monte Of The Month -- May 2013
Joined: Oct 2010
Posts: 4,389
From: Albertville MN
Well after 3 guys tell you the samething. I guess thats what has to be done. Don't ask me how. But I got it out with my wifes help! Thanks Honey. I don't know how I'm going to get the new one in there ?? it was a BITCH ! I want to have a face to face with the engneer that designed that. So I can kick him in the NUTS !
Thanks Mike , Space & Seattle Mike 
Thanks Mike , Space & Seattle Mike
