Info: Heat problem 2000 Monte SS
Hi,
2000 Monte SS 3.8
Heater Control does not change vents. Fan works all speeds, but nothing changes- blows thru every vent simultaneously. Hot/Cold adjusts. But no matter the setting everything blows thru all vents at same time.
Tried researching but not having luck because all different cars or different circumsrances.
I believe I have "Dual Heat Zone."
Does this vehicle have more than 1 Blend Door Actuator?
Is this Heater Control operated by vacuume or electronic?
Any help in this matter would be appreciated.
Have a great day!
2000 Monte SS 3.8
Heater Control does not change vents. Fan works all speeds, but nothing changes- blows thru every vent simultaneously. Hot/Cold adjusts. But no matter the setting everything blows thru all vents at same time.
Tried researching but not having luck because all different cars or different circumsrances.
I believe I have "Dual Heat Zone."
Does this vehicle have more than 1 Blend Door Actuator?
Is this Heater Control operated by vacuume or electronic?
Any help in this matter would be appreciated.
Have a great day!
Thread
Thread Starter
Forum
Replies
Last Post
6th Gen ('00-'05): Heat not working on drivers side
Arickman42
Monte Carlo Repair Help
3
Sep 4, 2016 07:26 AM
6th Gen ('00-'05): Strange heat problems. (affects both pass. and driver)
blackbeauty89
Monte Carlo Repair Help
9
Dec 27, 2012 06:51 PM
5th Gen ('95-'99): Climate control problem ?
bblonco
General Monte Carlo Talk
3
Apr 2, 2012 02:22 AM




