Headlight Adjustment

Reply Subscribe

Thread Tools

Search this Thread

Sep 19, 2011 | 07:55 PM

tloughrin

Thread Starter

Joined: Jul 2009

Posts: 38

From: Philadelphia

Headlight Adjustment

I just bought black Depo Headlights for my 06. The low beams were out of alignment so I fixed them. For the life of me i cant figure out how to adjust the high beams

.

Any help is appriciated

Sep 19, 2011 | 09:14 PM

xxtheshockerxx

Monte Of The Month -- October 2011
Monte Of The Month -- July 2014
RED DEVIL

Joined: Dec 2010

Posts: 5,982

From: Madrid, Iowa

i dont think you can adjust the high beams. i never did and there is only one screw for adjustment.

Sep 20, 2011 | 02:55 AM

Zeke

Joined: Sep 2011

Posts: 554

From: North Syracuse, NY, USA

xxTheShockerxx is 100% correct ...

Same deal with my '03 SS ...

Sep 20, 2011 | 05:20 AM

tloughrin

Thread Starter

Joined: Jul 2009

Posts: 38

From: Philadelphia

So then any ideas on why they are so far off from each other?

Sep 20, 2011 | 06:40 AM

Space

Joined: Jul 2008

Posts: 33,585

From: Beach`in Florida

I've searched the MCF & also my search engines for the answer to your problem with no luck..

I suggest that you contact the manufacturer that made them, or the company that sold them to you...

Check back on your thread to see if any of expert member's may be able to help & make a post...

Good Luck

Sep 20, 2011 | 08:34 AM

ChibiBlackSheep

Monte Of The Month -- August 2014

Joined: Sep 2008

Posts: 25,145

From: Southeast PA

Did you seat the actual bulb incorrectly on the high beams? Sometimes people miss a tab, or they don't push the bulb in all the way before they turn it.

Sep 20, 2011 | 09:06 AM

03JGMonte

Monte Of The Month - March 2010

Joined: Oct 2009

Posts: 15,217

From: Missouri

Yeah id agree with chibi cuz the highs shpuld be the same unless one headlight is way off from the other

Sep 20, 2011 | 05:10 PM

tloughrin

Thread Starter

Joined: Jul 2009

Posts: 38

From: Philadelphia

I checked the both bulbs, they are in correctly. The drivers side is higher that the low beams and the passenger side is lower than the low beams. The high beams are supposed to be higher than the low beams correct?