Interior/Audio/Visual Electronics Discuss your audio/visual system and your interior here.

Trac off/ ABS lights wont turn off??

Old Dec 22, 2015 | 09:29 PM
  #1  
Legend's Avatar
Thread Starter
|
Joined: Dec 2015
Posts: 8
Default Trac off/ ABS lights wont turn off??

I have a 2001 Monte Carlo ss. A couple weeks ago my car would be fine until I would turn the steering wheel, then the Trac off & ABS lights came on. Now the lights stay on all the time right at startup?? Any help?
 
Old Dec 22, 2015 | 09:42 PM
  #2  
plumbob's Avatar
Monte Of The Month -- January 2016
5 Year Member3 Year Member1 Year Member
Joined: Feb 2013
Posts: 2,293
From: Pacific NW
10 Year Member
Default

Most likely a bad ABS wheel speed sensor. Unfortunately, that sensor is an integral part of the wheel hub and can't be replaced separately. A good scan tool should be able to tell you which wheel it is.
 

Last edited by plumbob; Dec 22, 2015 at 09:49 PM.
Old Dec 22, 2015 | 09:50 PM
  #3  
Legend's Avatar
Thread Starter
|
Joined: Dec 2015
Posts: 8
Default

Thank you for your help! I've been looking for what it could be on the internet and this is probably the problem
 
Old Dec 22, 2015 | 10:09 PM
  #4  
plumbob's Avatar
Monte Of The Month -- January 2016
5 Year Member3 Year Member1 Year Member
Joined: Feb 2013
Posts: 2,293
From: Pacific NW
10 Year Member
Default

Your welcome.

There are several threads posted on this site on how to replace a wheel hub.
Sometimes the sensor just needs to be cleaned, but if you have over 100.000 miles on your car you're probably due for new hubs. Usually the front ones go first.
 
Old Dec 22, 2015 | 10:15 PM
  #5  
Legend's Avatar
Thread Starter
|
Joined: Dec 2015
Posts: 8
Default

Yeah it has over 100,000, my checkup time is due in a couple hundred miles, so I will be sure to get it checked out while it's in! Thanks!
 
Old Dec 23, 2015 | 04:59 AM
  #6  
fatfig's Avatar
Joined: Mar 2014
Posts: 49
Default

number two problem, unplug them and clean the connections, number three, check your harass for a short.....good luck
 
Old Jan 11, 2016 | 07:56 PM
  #7  
culater365's Avatar
Joined: Aug 2013
Posts: 15
From: Muskego, WI
Default

Unfortunately for me, I had my sensors in the front left and right hubs go bad, and the wiring for the left side had been broke, allowing rust into the wire and travel up at least 2 feet (as much as I took out). Id check anything you can, and hope yours arent like mine
 
Old Jan 19, 2016 | 12:49 PM
  #8  
fleetwood1976's Avatar
Joined: Jan 2016
Posts: 2
Default

i replaced both front hubs as scan tool had indicated and they worked great for about a week then light was back on. guess i will search for a short.
 
Old Jan 20, 2016 | 05:23 AM
  #9  
fatfig's Avatar
Joined: Mar 2014
Posts: 49


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:36 PM.