Door Sills
#1
06-27-2010 | 02:13 PM
Thread Starter
|
Monte Of The Month -- December 2011
Monte Of The Month -- September 2014
iTrader: (2)
Joined: Apr 2010
Posts: 12,270
From: Mentor, Ohio
Door Sills
So, I wanted door sills for my Monte (the sills looked incomplete with out them). But I also did not want to pay $140 from PFYC to get them. I found on an Impala forum a guy that got some custom ones for his 4 door Impala from a guy on eBay.
I contacted the seller and he hooked me up with some sweet ones for my Monte. The guy was GREAT to work with and did a fantastic job!
I have all the info about the sills (and more pics before/after) here:
http://crzyz28.sytes.net/mycars/2004...or_sills1.html
I contacted the seller and he hooked me up with some sweet ones for my Monte. The guy was GREAT to work with and did a fantastic job!
I have all the info about the sills (and more pics before/after) here:
http://crzyz28.sytes.net/mycars/2004...or_sills1.html
#4
06-28-2010 | 09:30 AM
Thread Starter
|
Monte Of The Month -- December 2011
Monte Of The Month -- September 2014
iTrader: (2)
Joined: Apr 2010
Posts: 12,270
From: Mentor, Ohio
They were $70 said and done, shipped to my door. Still pricey, but considering these were custom, I felt the money was better spent on these.
I've seen the rolls you can buy "cut to fit" and I thought those were kinda lame. I am very happy with these.
I've seen the rolls you can buy "cut to fit" and I thought those were kinda lame. I am very happy with these.
#9
06-28-2010 | 11:25 PM
Thread Starter
|
Monte Of The Month -- December 2011
Monte Of The Month -- September 2014
iTrader: (2)
Joined: Apr 2010
Posts: 12,270
From: Mentor, Ohio
Here's the link to the seller's eBay store:
http://stores.ebay.com/BEST-DASH-TRIM
I have not seen him offer the Monte door sills (only the Impala ones). But shoot him an e-mail through eBay. I'm guessing he still has the measurements from mine, but if not, I believe I had him make mine 33 inches by 2.5 inches.
I was very thrilled with the end result. I later asked (as it came to me after I stuck mine one) if he could have done the SS letters in red (and he did confirm it can be done, but did not say if it would be an additional cost).
I thought another look that would be good (and I did not ask if he would be able to do this) is something with the Monte's Knight Crest then the script Monte Carlo and the SS lettering (take the bow ties away).
Like I said, the guy was very patient and did a great job for me.
http://stores.ebay.com/BEST-DASH-TRIM
I have not seen him offer the Monte door sills (only the Impala ones). But shoot him an e-mail through eBay. I'm guessing he still has the measurements from mine, but if not, I believe I had him make mine 33 inches by 2.5 inches.
I was very thrilled with the end result. I later asked (as it came to me after I stuck mine one) if he could have done the SS letters in red (and he did confirm it can be done, but did not say if it would be an additional cost).
I thought another look that would be good (and I did not ask if he would be able to do this) is something with the Monte's Knight Crest then the script Monte Carlo and the SS lettering (take the bow ties away).
Like I said, the guy was very patient and did a great job for me.
