windshield wiper arm - 2002 monte carlo
#1
windshield wiper arm - 2002 monte carlo
Wife tried to use her windshield wipers and the drivers side works fine. The passenger side arm assembly is blown out it seems. Motor works fine, but the arm itself is stripped out where it meets the motor. I took the cap off, unscrewed the bolt and attempted to take the arm off. It doesn't budge? How do I take this arm assembly off so I can replace it??? It seems to be stuck on there?
Photos
Photos
#2
RE: windshield wiper arm - 2002 monte carlo
to get the arm off, depending on how bad it's stuck on there (and it looks stuck good!).
Put a pry tool of sorts (a screw driver for us poor folk mechanics) and put the nut back on the just a few threads and tap it with a hammer while lifting on the arm with the pry tool
good luck mang! hope it's not as bad as it looks
And oh yea, welcome to the forum!
Put a pry tool of sorts (a screw driver for us poor folk mechanics) and put the nut back on the just a few threads and tap it with a hammer while lifting on the arm with the pry tool
good luck mang! hope it's not as bad as it looks
And oh yea, welcome to the forum!
Thread
Thread Starter
Forum
Replies
Last Post
Brandon Lee Mann Duncan
Paint/Body Work/Exterior
3
04-14-2013 11:34 AM