update for my monte.. page.
#11
11-07-2011, 09:56 PM
updating my audio and electrical getting ready for a BIG SPL build. stuff comming this week. post pics after everything is done. i need to order more stuff just doing it at different times so it doesnt kill my wallet! 
Knuconcepts 1/0 guage wire
inline fuses
mechman 270amp Alternator
crescendo BC2000D
Knuconcepts 1/0 guage wire
inline fuses
mechman 270amp Alternator
crescendo BC2000D
#12
11-07-2011, 11:20 PM
Cool I would love to do a system in my car but it's just not a practical option right now. i think i'm gonna add a powered sub soon tho. If you still need an oil tube you should contact 03limitedss Frank because he finds a lot of parts.
#13
11-08-2011, 08:14 AM
yeah i dont blame you. its an expensive hobby. im addicted to it for some reason lol. a nice little 12 or 10 would really add alot and it wouldnt take up much space. oh yeah thats a good idea... i think i might do that. cause i cant find one anywhere.
#14
11-08-2011, 08:14 AM
HA! when i was re-reading the thread, i was thinking . . . i should tell him to talk to frank, he's got like 3 engine covers
#17
11-16-2011, 12:34 PM
thanks blazzed!
i talked to frank and he had one so now i just have to put the engine cover on.. ill post pics of that sometime this week hopefully.
but for now here are some updated pictures...
unboxing of my new beautiful amp. will be running atleast 2 of these when im done.
By boxman420 at 2011-11-16
always weld your cables to the terminals! it will save you some headaches! and use flux!!
By boxman420 at 2011-11-16
2 runs of 0 gauge front to back. one is cadence and the other is knuconceptz i like both very well. but knuconceptz is usually easier to get your hands on. so i switched to them.
By boxman420 at 2011-11-16
ipod/USB cable ran into the center council.
By boxman420 at 2011-11-16
bass ****, with the stinger volt meter. not to clean looking. but ill figure something out for them.
By boxman420 at 2011-11-16
this is where i am at right now. i dont think my TYPE Rs like me to much now that im giving them 1000 watts each at 1ohm. but they are sure ALOT louder then before. alot more planns in the making just doing it all one step at a time!
By boxman420 at 2011-11-16
i talked to frank and he had one so now i just have to put the engine cover on.. ill post pics of that sometime this week hopefully.
but for now here are some updated pictures...
unboxing of my new beautiful amp. will be running atleast 2 of these when im done.
By boxman420 at 2011-11-16
always weld your cables to the terminals! it will save you some headaches! and use flux!!
By boxman420 at 2011-11-16
2 runs of 0 gauge front to back. one is cadence and the other is knuconceptz i like both very well. but knuconceptz is usually easier to get your hands on. so i switched to them.
By boxman420 at 2011-11-16
ipod/USB cable ran into the center council.
By boxman420 at 2011-11-16
bass ****, with the stinger volt meter. not to clean looking. but ill figure something out for them.
By boxman420 at 2011-11-16
this is where i am at right now. i dont think my TYPE Rs like me to much now that im giving them 1000 watts each at 1ohm. but they are sure ALOT louder then before. alot more planns in the making just doing it all one step at a time!
By boxman420 at 2011-11-16
#18
11-16-2011, 05:14 PM
Bro is that the engine cover ur using thats on the first page?? I just now saw it and I don't think that's going to work!
I say that because those arent the ones on the 3800 montes! I'm surprised nobody said anything about it. It's a diff design for some 3800 cars that didnt have engine mounts on top of the radiator support, as where montes had 2 mounts. So the cover is trimmed on both sides at the bottom, the one u have is only trimmed on the right bottom side. Hope this makes sense lol :p
But yea I'm not sure if it's going to work
Look for yourself
Here's one on a bonneville
And this is a monte
I say that because those arent the ones on the 3800 montes! I'm surprised nobody said anything about it. It's a diff design for some 3800 cars that didnt have engine mounts on top of the radiator support, as where montes had 2 mounts. So the cover is trimmed on both sides at the bottom, the one u have is only trimmed on the right bottom side. Hope this makes sense lol :p
But yea I'm not sure if it's going to work
Look for yourself
Here's one on a bonneville
And this is a monte
#19
11-16-2011, 06:07 PM
Bro is that the engine cover ur using thats on the first page?? I just now saw it and I don't think that's going to work!
I say that because those arent the ones on the 3800 montes! I'm surprised nobody said anything about it. It's a diff design for some 3800 cars that didnt have engine mounts on top of the radiator support, as where montes had 2 mounts. So the cover is trimmed on both sides at the bottom, the one u have is only trimmed on the right bottom side. Hope this makes sense lol :p
But yea I'm not sure if it's going to work
Look for yourself
Here's one on a bonneville
And this is a monte
I say that because those arent the ones on the 3800 montes! I'm surprised nobody said anything about it. It's a diff design for some 3800 cars that didnt have engine mounts on top of the radiator support, as where montes had 2 mounts. So the cover is trimmed on both sides at the bottom, the one u have is only trimmed on the right bottom side. Hope this makes sense lol :p
But yea I'm not sure if it's going to work
Look for yourself
Here's one on a bonneville
And this is a monte
yes i know! i have noticed that! im gonna have to trim it a little bit. cause i went to mount it and it does hit the left motormount. i didnt know till after i had it painted that it was different. but ill make it work.