Real Fire Airbrushing/Wash Pics
#1
Real Fire Airbrushing/Wash Pics
Just finished washing her since we hade it out of winter storage figured I would take some pics of the new paint uner the hood and some other pics because she's looking so shiny as always. The parts in the trunk are just a small peice of our stock pile of parts to install. New Triple Edge Performance trans done to the hills with a 3200 stall converter being installed next sat, all the best parts in the trans every upgrade available from TEP. More pics to come of the install after it is done. Next winter is another 10 to 15 thousand in the motor and all the suspention parts through this summer and hook the water/methonal kit. As well as the rest of the C5 Z06 brake parts and Baer Decelerators drilled and slotted if you wanna go fast, you have to slow fast. Let me know what you think of the airbrushing the guy who does it is simply amazing at what he does, his portfolio would blow your mind.
#3
Joined: Apr 2010
Posts: 12,270
From: Mentor, Ohio
Very nice, the under hood flames look well done. My taste says it needs a little something on the exterior to go with the hood.
BTW - What type of bolts do you have on the diagonal braces?
BTW - What type of bolts do you have on the diagonal braces?
#6
Thanks for the compliments I really like the paint it was supposed to be a massive satin with horns over the whole hood, he painted it twice but because the hood is fiberglass it was wavy and wasent coming to gether for him so we went simple with it.
Maniac, I like the clean look, everybody sleeps on this car until I put it on boost and it sounds like a jet people tend to back off then, it still gets looks now but I'm not that flashy. The bolts in the diagonal braces are stainless steal cap screws with allen wrench heads.
Miller, Yeah its the cartuning setup with the intercooler
Maniac, I like the clean look, everybody sleeps on this car until I put it on boost and it sounds like a jet people tend to back off then, it still gets looks now but I'm not that flashy. The bolts in the diagonal braces are stainless steal cap screws with allen wrench heads.
Miller, Yeah its the cartuning setup with the intercooler