Engine/Transmission/Performance Adders Chat about your engine, transmission, nitrous, superchargers, turbos, and tuning.

Loses power on hard left turns and trans slipage

Old Oct 3, 2011 | 11:52 PM
  #1  
forklift's Avatar
Thread Starter
|
Joined: Jul 2011
Posts: 37
Default Loses power on hard left turns and trans slipage

So my daughters 99 seems to lose power on hard left turns. Its regardless of how much gas is in the tank and the power just seems to drop a bit, maybe a few hundred rpms and comes back.

Also, sometimes the trans slips when you pull off the light or stop sign, then all is fine, something normal or happens a lot?
 
Old Oct 3, 2011 | 11:59 PM
  #2  
red04montels's Avatar
Monte Of The Month -- September 2010
10 Year Member5 Year Member3 Year Member1 Year Member
Joined: Aug 2009
Posts: 9,380
From: Wisconsin
15 Year Member
Default

how many miles on her car? or on the trans
 
Old Oct 4, 2011 | 08:58 AM
  #3  
forklift's Avatar
Thread Starter
|
Joined: Jul 2011
Posts: 37
Default

125,000
 
Old Oct 4, 2011 | 02:12 PM
  #4  
monte07's Avatar
Joined: Feb 2009
Posts: 2,483
From: lakeland fl
15 Year Member
Default

when was the last time you did rutene things to it like oil's air filter things like that? some times older fluid seems to make powertrains run a little slugeshly
 
Old Oct 4, 2011 | 02:14 PM
  #5  
monte07's Avatar
Joined: Feb 2009
Posts: 2,483
From: lakeland fl
15 Year Member
Default

i would do that first before thinking it is much more serios problem nock the odveus out the way then go from there. when under the car check every thing espessially the boots on the axels as well as any thing driping or worn
 
Old Oct 4, 2011 | 06:56 PM
  #6  
Warhorse's Avatar
Joined: Mar 2011
Posts: 303
From: Pennsylvania
5 Year Member
Default

Stupid question, how much fluid in the trans? Could be low....

Mike
 
Old Oct 5, 2011 | 07:33 AM
  #7  
forklift's Avatar
Thread Starter
|
Joined: Jul 2011
Posts: 37
Default

yeah I did a fluid/filter change a few months ago to fix the leak with the trans pan, I should have said that
 
Old Oct 5, 2011 | 08:33 AM
  #8  
ChibiBlackSheep's Avatar

Monte Of The Month -- August 2014
10 Year Member5 Year Member3 Year Member1 Year Member
Joined: Sep 2008
Posts: 25,145
From: Southeast PA
15 Year Member
Default

The only thing I could think of is a possible wiring problem, or a problem with the right wheel hub assembly.
 
Old Oct 5, 2011 | 03:35 PM
  #9  
mwjames's Avatar
Joined: Sep 2011
Posts: 370
From: Minnesota
Default

Is there any check engine lights on? If no lights are on run it 10 minutes or so doing the problem behavior and see if it kicks on then
 
Old Oct 20, 2011 | 08:54 AM
  #10  
forklift's Avatar
Thread Starter
|
Joined: Jul 2011
Posts: 37
Default

no engine lights and I dont think its a hub as the engine actually takes a few hundred RPM dive on those hard lefts, its not like the trans is slipping on them
I think the off the line problem is a solenoid in the trans, just a guess
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:58 AM.