I'm looking to swap a 350 crate engine in place of my stock 305 just looking for ideas on heads, intakes cam etc. to use as I rebuild the 350 any input is highly appreciated

 

are you looking to buy a crate motor or rebuild a 350?

 

I've already have a 350 that I want to rebuild that is a old crate engine

 

What's the spec's on your 350? How much power you looking for?you mostly going to cruise or race it? There's a ton of ways you can go with a 350

 

It's a 10066036 hecho en Mexico crate 350. Not sure on specs at this time looking to have something with enough power to hold my own if raced but something I can drive when ever
I want.

 

Depending on what you have for compression an heads you might be able to do a simple rebuild with a good cam/intake/carb an make some good street able power. If the heads are to small you might have look into getting a set. Aluminum is better than iron an there's a few that you can get for a decent price.

 

Yeah the heads are less than impressive they are stock 76cc, intake is a 249 "t" no cam yet any ideas on heads and cam