Horsepower Estimates
#11
the 4.6 in the gt is a 2 valve motor,sohc. the powerband in the gt is terrible and they have to be geared aggressivly to really go.the 4.6 in the newer gt 05 and up is a 3 valve motor. the 4.6 in the mach 1 is a 4.6 dohc 4 valve motor and you can get them with an auto. its essentially the cobra motor without the blower,different cams and not hand built and they only come in a stick.
#12
I believe the cobra is actually a 5.2 with a supercharger. The mach 1 also had a CAI through the hood from the factory which helped make more power.
http://www.canadiandriver.com/news/0..._mach_20-1.jpg
http://www.shnack.com/photopost/data/549/03mach1_6.jpg
Shaker hoods are awesome.
I hate mustangs, I feel the interior is bland, they really dont have that many features, and they are EVERYWHERE. But for some reason I love my dads, I think its the sound, or how fun it is to drive. Something just makes it stand out.
I think for now Im going to start with the M90 and maybe later on down the road, when im looking for more power and dumping a ton more money into the car ill do a turbo.
Just as a reference, whats the smallest pulley that can be run on an M90?
http://www.canadiandriver.com/news/0..._mach_20-1.jpg
http://www.shnack.com/photopost/data/549/03mach1_6.jpg
Shaker hoods are awesome.
I hate mustangs, I feel the interior is bland, they really dont have that many features, and they are EVERYWHERE. But for some reason I love my dads, I think its the sound, or how fun it is to drive. Something just makes it stand out.
I think for now Im going to start with the M90 and maybe later on down the road, when im looking for more power and dumping a ton more money into the car ill do a turbo.
Just as a reference, whats the smallest pulley that can be run on an M90?
#13
LOL! This is funny, we find ourselves discussing Mustangs on a Monte Carlo forum. But I have to agree that the interior to Mustangs is rather boring, from 2005 to 2010 the interior, which is supposed to be reminiscent of a 60's or 70's Stang is rather boring, squared, and unattractive, where the new interior of the Camaro and Challenger are very well done, especially the Camaro. xD Chevy FTW! And it's true, Mustangs are way too commonplace, you see way too many around.That's what's nice about Monte Carlos, they're a pretty car, but there aren't that many of them on the road, nowhere near as many Mustangs as there are.
#14
When I had my gtp with a PLOG, 3.4", 1.9 modded stock rockers, 180 tstat, autolite 104s, a 3" catless DP, resonator delete, and HAI- I could easily beat the early 2000s 260 HP Mustang GT's stock or stock w/ exhaust/intake (I'm not saying put bus lengths on them, but I'd always beat them by some margin)- and typically the L67's do about 300 crank hp with those mods. The new 05+ 300ish hp GT's would walk me a bit (assuming its just due to the weight difference).
You'll have a ton more mods, plus you have better gearing with the 3.29s- there is no reason you shouldn't be able to do 350 crank hp- and easily beat the 300 hp mustang.
#15
I agree with bumpin. it wont take a world of power to beat the mach 1. assuming that he doesnt do anything to it. and just for knowledge. the 03-04 cobra is a 4.6 4v with a blower. its hand built. the earlier years didnt have the blower just the 4v motor. the cobra R years back had the 5.4 but theyre rare. i was actually looking at getting a mach 1 before i bought the monte but the price kept me away.
#16
Just drop in the LS4 with the 4T65 HD tranny and do a couple of mods rockers, intake and the TB ported with the HP tune, CAI, and Exhaust and your at 400 HP at the crank and I tell you hold on to your hat!! or spend the money for the Turbo and your at 500 at the crank but the tranny will need to be beefed up our its not long for this world.
#18
At this point in time my tranny is acting a bit funny, when shifting from first to second it takes longer than usual and the motor revs up another 500 rpms. When second finally kicks in its a hard shift. Because of this im debating whether I should just pull the motor and tranny and do a full build up on both. It would be smarter, but more expensive....
Opinions?
Ive already looked into this idea a while back and decided against it but am rethinking it now.
Opinions?
Ive already looked into this idea a while back and decided against it but am rethinking it now.
#20
Because of this im debating whether I should just pull the motor and tranny and do a full build up on both. It would be smarter, but more expensive....
Opinions?
Opinions?
Just drop in the LS4 with the 4T65 HD tranny and do a couple of mods rockers, intake and the TB ported with the HP tune, CAI, and Exhaust and your at 400 HP at the crank and I tell you hold on to your hat!! or spend the money for the Turbo and your at 500 at the crank but the tranny will need to be beefed up our its not long for this world.