Im looking at getting a throttle body, possibly an air intake, plus a various other smaller accesories to give me some big gains on my 3400. I was curious after looking around, are they even made?

 

I know I've seen them out there somewhere but I just checked pfyc.com, zzp, and 3800performance and can't find them anymore.

Anyone else know where these might be? I could have sworn the first 2 carried something.

 

http://mrzperformance.vstore.ca/prod...05660bdb7a9faa

 

WOW!!! That is one hell of a bore job!!!

 

no that is a completely diff TB. the 3100 TB cant be bored all that much. i have bored many TB's and hte one i did can be see on the last page of my WWW. the shape of the stock 3100 and 3400 just doesnt lend itself to gains from porting. yes there are some gains seen, but the majority of any gain is from matching the TB to the upper intake manifold... they are normally quite a bit off from factory. but for a nice bored TB go to 60degreev6.com and click their store for details on their TB's they have a circular shape vs the oval of the stock. so it will flow much better.

 

http://www.60degreev6.com/store/inde...t&catId=10

check out this link if you want some 3400 performance parts !!!!

 

Here's the one I was looking for. I stumbled across it this morning.

http://www.zzperformance.com/grand_p...&catid=113

 

I have the 3400, and i just installed the 65mm throttle body from 60v6. I ported the intake manifold to match the bore, and holy crap does the car efff fly! Best mod for speed ive done.

 

rcohen, could you post a little more on what you ended up doing? did you bring it in to do it? where did you go? costs? ect...


im really just trying to figure out the cost of the mods, getting it done is the next stage!

 

i bored out the intake manifold and just bolted the new tb on. was a lot harder than it sounds..ie gasket annoyances and throttle cable problems, but it all worked out. did it myself tho with a lot of help from pheonix.