rockers and intake job saturday april 2 2011

April 3, 2011

7

0

rocker covers and LIM installed. cleaned and ready for the UIM and the rest of the engine parts.

rocker covers and LIM installed. cleaned and ready for the UIM and the rest of the engine parts.

0 2011/04/03 12:33:23 Justin Kni

rockers installed on one side

rockers installed on one side

0 2011/04/03 12:33:23 Justin Kni

springs installed on both sides

springs installed on both sides

0 2011/04/03 12:33:23 Justin Kni

the wire that the spring is wound from on the LS6 spring is much thicker and the spring its self is a full winding taller than stock.

the wire that the spring is wound from on the LS6 spring is much thicker and the spring its self is a full winding taller than stock.

0 2011/04/03 12:35:57 Justin Kni

2 springs and a valve seal installed on the front bank cylinder head

2 springs and a valve seal installed on the front bank cylinder head

0 2011/04/03 12:35:57 Justin Kni

LIM gaskets were toast!!!

LIM gaskets were toast!!!

0 2011/04/03 12:39:07 Justin Kni

this was my external leak on the front right above where the thermostat housing is on the engine. coolant never made it into the crankcase or the EGR port

this was my external leak on the front right above where the thermostat housing is on the engine. coolant never made it into the crankcase or the EGR port

0 2011/04/03 12:39:07 Justin Kni