Monte Carlo Forum - Monte Carlo Enthusiast Forums
Slapped on some deadener and duct seal with BBs for more added weight to reduce the resonant frequency. Covered it back up and put everything back together again for a much improved sound!
Slapped on some deadener and duct seal with BBs for more added weight to reduce the resonant frequency. Covered it back up and put everything back together again for a much improved sound!
0 2013/03/17 20:08:59
Couple layers of fiberglass resin BBs for added weight.
Couple layers of fiberglass resin BBs for added weight.
0 2013/03/17 20:07:59
Fiberglass mat laid down
Fiberglass mat laid down
0 2013/03/17 20:07:59
Old kick panels - no sound treatment!
Old kick panels - no sound treatment!
0 2013/03/17 20:07:59
My trophies from the '12 competition season!
My trophies from the '12 competition season!
0 2013/02/02 20:38:08
My radio and a small award I won at another show
My radio and a small award I won at another show
1 2013/02/02 20:36:51
Trophies my team and I won at MECA World Finals in Oct '12
Trophies my team and I won at MECA World Finals in Oct '12
0 2013/02/02 20:25:53
Engine bay
Engine bay
0 2013/02/02 20:24:21
More night shots
More night shots
0 2013/02/02 20:24:21
With a little help from my friend :)
With a little help from my friend :)
0 2013/02/02 20:24:21
Everything in the trunk installed and lit up ready to go
Everything in the trunk installed and lit up ready to go
0 2013/02/02 20:22:50
At night
At night
0 2013/02/02 20:22:50
All vinyled up by yours truly!
All vinyled up by yours truly!
0 2013/02/02 20:22:50
Prepping door panels for vinyl
Prepping door panels for vinyl
0 2013/02/02 20:22:00
Vinyl goes on
Vinyl goes on
0 2013/02/02 20:22:00
My entire dash and its skeleton.
My entire dash and its skeleton.
0 2013/02/02 20:22:00
What I had to do to get to the dash corners to cut
What I had to do to get to the dash corners to cut
0 2013/02/02 20:19:35
Speaker enclosure in the dash corners installed. Taken from above through the windshield
Speaker enclosure in the dash corners installed. Taken from above through the windshield
0 2013/02/02 20:19:35
Doors deadened heavily
Doors deadened heavily
0 2013/02/02 20:18:38
Cutting my dash to make room for some speakers!
Cutting my dash to make room for some speakers!
0 2013/02/02 20:18:38
Speaker installed.
Speaker installed.
0 2013/02/02 20:18:38
Building kick panel enclosure
Building kick panel enclosure
0 2013/02/02 20:18:11
Covered with temp carpet
Covered with temp carpet
0 2013/02/02 20:18:11
Covered back up, sacrificed e-brake in the process.
Covered back up, sacrificed e-brake in the process.
0 2013/02/02 20:18:11
A-pillar construction
A-pillar construction
0 2013/02/02 20:12:24
Glassed and sanded, almost done
Glassed and sanded, almost done
0 2013/02/02 20:12:24
Prep for fiberglass
Prep for fiberglass
0 2013/02/02 20:12:24
Cutout Chevy logo, vinyled, and lit with LEDs
Cutout Chevy logo, vinyled, and lit with LEDs
0 2013/02/02 20:11:39
Layered knight's crest on spare tire piece. Lights up between logo and silver border
Layered knight's crest on spare tire piece. Lights up between logo and silver border
0 2013/02/02 20:02:19
My working space! Building the trunk lid piece in the parking lot.
My working space! Building the trunk lid piece in the parking lot.
0 2013/02/02 20:02:19
Trunk lid wired up
Trunk lid wired up
0 2013/02/02 20:02:19
Close up
Close up
0 2013/02/02 20:00:32
Carpeted spare tire piece
Carpeted spare tire piece
0 2013/02/02 20:00:32
Spare tire cover piece
Spare tire cover piece
0 2013/02/02 20:00:32
Processor all wired up on its panel on the side
Processor all wired up on its panel on the side
0 2013/02/02 19:59:31
bottom of rear deck cover, fitted for amps
bottom of rear deck cover, fitted for amps
0 2013/02/02 19:59:31
Amp rack
Amp rack
0 2013/02/02 19:59:31
Prepping for body filler
Prepping for body filler
0 2013/02/02 19:56:08
After a few coats
After a few coats
0 2013/02/02 19:56:08
Body filler and lots and lots of sanding.
Body filler and lots and lots of sanding.
0 2013/02/02 19:56:08