Suspension Build: Suspension possibilities
Joined: Feb 2008
Posts: 6,460
You could probably dig it via the way back machine website, but searching through there is miserable.
IMO, its probably a lot less time to just grab some calipers for a quick bar diameter check and take the z34 ones if either or both is larger than what you've got.
Thread Starter
|
Joined: Apr 2022
Posts: 8
From: Idaho
I agree with the calipers for the sway bar(s). The other build sheet stuff was for the struts. I guess I kind of ran that together. Sorry...I appreciate the advice however. The weather's taken a turn here although so that may not happen this weekend as planned.
Thread Starter
|
Joined: Apr 2022
Posts: 8
From: Idaho
Last time I remember seeing that info was back on mymonte.com which has been closed a long time.
You could probably dig it via the way back machine website, but searching through there is miserable.
IMO, its probably a lot less time to just grab some calipers for a quick bar diameter check and take the z34 ones if either or both is larger than what you've got.
You could probably dig it via the way back machine website, but searching through there is miserable.
IMO, its probably a lot less time to just grab some calipers for a quick bar diameter check and take the z34 ones if either or both is larger than what you've got.
Pages 11 and 11a seem to answer the question. Looks like the only difference is the 2 sway bars.
Thread
Thread Starter
Forum
Replies
Last Post
6th Gen ('00-'05): Performance shocks & FE4 suspension compatibility?
Red Nightmare
Tires/Rims/Suspension
0
Jul 29, 2013 12:21 PM
