SLP grill ordered!
Monte Of The Month -- August 2012
Joined: Apr 2011
Posts: 6,074
From: Seattle
When I replaced the badge on my '03 I used a hair dryer to heat it up, and a piece of waxed floss (in a back and forth sawing action) to seperate the adhesive from the paint. Then I carefully lifted around the edges with my fingertips and it popped right off. I cleaned the residual adhesive off with rubbing alcohol.
Monte Of The Month -- March 2013
Joined: Jun 2010
Posts: 8,442
From: michigan
When I replaced the badge on my '03 I used a hair dryer to heat it up, and a piece of waxed floss (in a back and forth sawing action) to seperate the adhesive from the paint. Then I carefully lifted around the edges with my fingertips and it popped right off. I cleaned the residual adhesive off with rubbing alcohol.
Don't use a screwdriver on the emblem unless you also use a towel or something because you could scratch the paint, you can use the floss on top and bottm and then just pull it off with your hands, that's what I did
Be sure to post a pic when you geter done!
