Custom Trunk Lid Panels / Vinyl graphics / etc.
Joined: Jun 2010
Posts: 84
Picture didn't come thru on your post is it the team monte on my trunk lid?
if so do you want it to fill the back window to scale? my bow tie is 32" across which is a good size , stays within the curve..next question is a single color such as mine or full color?
if so do you want it to fill the back window to scale? my bow tie is 32" across which is a good size , stays within the curve..next question is a single color such as mine or full color?
Thread Starter
|
Monte Of The Month -- November 2009
Joined: Aug 2009
Posts: 1,123
From: northeastern Illinios
yes we can turn that into a windshield banner. the top is red over silver. standard single color $35 , I'll check may go to $40...
as I look at the trunk graphic it very simular but with taz...wonder what it would look like pulled into banner form...I'd like to see it
as I look at the trunk graphic it very simular but with taz...wonder what it would look like pulled into banner form...I'd like to see it
hey jarhead can you do the front windshield banner, like the stock ones? i could use one now that i have tint, also that other thing that i asked about for under my car. thanks
Thread Starter
|
Monte Of The Month -- November 2009
Joined: Aug 2009
Posts: 1,123
From: northeastern Illinios
mitch I have the rem3mber decals you had originally asked foor what again did you change it to?
also look at the third brake lights and find a design close to what you want as a banner
Thread Starter
|
Monte Of The Month -- November 2009
Joined: Aug 2009
Posts: 1,123
From: northeastern Illinios
basically #15 with a slight lean left