New Member Area New to Monte Carlo Forum? Stop in tell us about you.

question

Old Jun 11, 2008 | 07:23 AM
  #1  
wxwindmill's Avatar
Thread Starter
|
Joined: Jun 2008
Posts: 3
From:
Default question

2007 SS How do you take the grill apart or the take off the plastic underneath the radiator?? I want to get behind the front bumper.
Should this question go to the DIY forum?? If not, where is the best place to get some help with this??
 
Old Jun 11, 2008 | 12:58 PM
  #2  
rchurch's Avatar
Joined: Nov 2004
Posts: 307
Default RE: question

I don't have an answer, but out of curiosity, why are you taking off the grill and/or bumper of a new car?
 
Old Jun 11, 2008 | 05:37 PM
  #3  
mickey's Avatar
Joined: Apr 2005
Posts: 4,810
15 Year Member
Default RE: question

I beliv eyou have those plastic rivets under there ya have to tak eout.

just pull the center part up and then they should come out easily. and then it should come apart.

you might have a screw or two around the front fenders on the inner fender wells but i dont think there was beliv eit was mostly just snap apart
 
Old Jun 11, 2008 | 07:01 PM
  #4  
wxwindmill's Avatar
Thread Starter
|
Joined: Jun 2008
Posts: 3
From:
Default RE: question

Yes I do not know how to approach the plastic rivets. I did not want to get carried away prying/pulling, so I thought I'd try giving a shout out for help.Sorry to be dense, but I am not picturing what you mean by 'pull the center part up'. Do the rivets have to be manuevered a certain way or do they just come with a tug or a light pry (with a screwdriver?)??


The underneath piece has 3 bolts with much of the rest tied into the bumper and wheel wells with the plastic rivets.

Abovethere is a plastic panel that comes off easily exposing the top of the grill, but it is not obvious to me what then has to come off in which order.

off topic forum feeback/tech issue
I tried to edit the first post to include question(s) about the plastic rivets, but that did not work for me when I tried it.

Thanks!!

ORIGINAL: mickey

I beliv eyou have those plastic rivets under there ya have to tak eout.

just pull the center part up and then they should come out easily. and then it should come apart.

you might have a screw or two around the front fenders on the inner fender wells but i dont think there was beliv eit was mostly just snap apart
 
Old Jun 12, 2008 | 01:42 PM
  #5  
wxwindmill's Avatar
Thread Starter
|
Joined: Jun 2008
Posts: 3
From:
Default RE: question

I finally had time to look at it closely and now know what you mean by pulling center part up. Thanks!! I was quite stupid with this case, but I've been burnt before prying on things that appeared pryable but were not.
 


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:06 AM.