Monte Carlo Forum - Monte Carlo Enthusiast Forums

Monte Carlo Repair Help Have a Monte problem and need help? Good at troubleshooting? Discuss it here!

4th Gen ('81-'88): Help!!!!

   
Old Apr 16, 2018 | 08:28 PM
Share
  #1  
Jordanb5280's Avatar
Thread Starter
Joined: Mar 2018
Posts: 19
Default Help!!!!
So I have a 4th gen I did not mark hoses dumb move. Of any one has a 4th gen and can help. What hoses connect to vacuum port switch ???? Any help would be appreciated !!!
 
Reply
Old Apr 17, 2018 | 04:34 AM
Share
  #2  
Jeffs02rwdSS's Avatar
Joined: Nov 2017
Posts: 1,300
From: Isanti, MN
5 Year Member
Default
Distributor vacuum advance connects to the ported vacuum on the carberator (ported vacuum above the throttle plate's )
 
Last edited by Jeffs02rwdSS; Apr 17, 2018 at 05:51 AM.
Reply
Old Apr 17, 2018 | 12:40 PM
Share
  #3  
Jordanb5280's Avatar
Thread Starter
Joined: Mar 2018
Posts: 19
Default
What hoses connect to this vaccum switch???
 
Reply
Old Apr 17, 2018 | 05:51 PM
Share
  #4  
Jeffs02rwdSS's Avatar
Joined: Nov 2017
Posts: 1,300
From: Isanti, MN
5 Year Member
Default
Here's a link with a bunch of different diagrams.https://www.autozone.com/repairguide...00c15280055cf5 you didn't give year or vin so best I can do for you.. Maybe figure 52 or 63 both are vin H
 
Last edited by Jeffs02rwdSS; Apr 17, 2018 at 05:56 PM.
Reply
Old Apr 17, 2018 | 05:52 PM
Share
  #5  
Jordanb5280's Avatar
Thread Starter
Joined: Mar 2018
Posts: 19
Default
Sorry it's a 85 monte carlo ss
 
Reply
Old Apr 17, 2018 | 06:16 PM
Share
  #6  
Jeffs02rwdSS's Avatar
Joined: Nov 2017
Posts: 1,300
From: Isanti, MN
5 Year Member
Default
This link should have it. https://www.autozone.com/repairinfo/...00c1528005163f try figures 83 thru 88
 
Reply
Back to Subforum
Monte Carlo Repair Help
View Next Unread
Trunk actuator cord cut


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 12:49 PM.