4th Gen ('81-'88): Bogging - please help!
Thread Starter
Joined: Jun 2013
Posts: 10
From: Michigan
Bogging - please help!
The internet and 5 back yard mechanics later, and I still have a bad bog - more so off idle but also while driving. Only happens when I punch the gas. Otherwise, runs great!
I've been trying numerous things including a new distributor, a new carb, plugs and wires were already new...
Th350c trans, 3.73 posi, ebay aluminum heads (2.02cc, 64cc, 2.02, 1.60), comp roller rockers 1.5, Edelbrock 650 (tried all 3 accelerator pump holes), unknown cam, MSD street fighter distributor with medium springs (tried heavy and light), 20" Foose wheels. Timing is around 14 and 36 @ 3000.
Video of bog:
Video at idle:
I've been trying numerous things including a new distributor, a new carb, plugs and wires were already new...
Th350c trans, 3.73 posi, ebay aluminum heads (2.02cc, 64cc, 2.02, 1.60), comp roller rockers 1.5, Edelbrock 650 (tried all 3 accelerator pump holes), unknown cam, MSD street fighter distributor with medium springs (tried heavy and light), 20" Foose wheels. Timing is around 14 and 36 @ 3000.
Video of bog:
Video at idle:
Last edited by Steven Zambron; Sep 27, 2022 at 03:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Opinion Needed: Is this 305 Cammed???
StonehouseMonte
General Monte Carlo Talk
5
May 27, 2014 08:59 PM
6th Gen ('00-'05): Pure SPL monte
Boxman420
Interior/Audio/Visual Electronics
7
Mar 25, 2013 06:23 AM
Adrian
Engine/Transmission/Performance Adders
1
Mar 9, 2010 09:47 PM
