Oh where to start. Son just turned 16 and mom gave to him her 87 that has been in storage for the past 10 years. Oh the fun so far replacing all the stuff that does not work now. Brakes are all good now but brake light stays on. Thinkin its prop valve. But what impact could this have on other issues..Here they are. Tranny shifts good but converter does not lock up. You can hit brake pedal and see that plus the rpms are 2000 plus at 55 mph. Cruise will not work when you hit set button but will when you work the resume or accel. Seems to be fine when running on flat ground but when on incline she gets upset and wont respond to the gas pedal which is around 45 mph. Has new plugs, wires and a few tanks of gas run through it so this thing is really tickin me off. One day its seals in the rear next day its the starter. Sooner or later everything will be replaced on this rig so someone point me in the right direction please. Thanks, Brian

 

Welcome to the forum. I am sure there will be some on here who can help you out once they see your thread!

 

bump