if u hav speakers in ur monte front doors please respond

Reply Subscribe

Thread Tools

Search this Thread

Dec 2, 2011 | 02:09 AM

#11

jasonsmith

Joined: Oct 2011

Posts: 163

Instead of using modeling clay to fill the gap. What about just using a Boom Mat and cutting it down to fit?

Dec 5, 2011 | 09:22 PM

#12

Milhouse

Joined: Oct 2010

Posts: 654

Quote:

Originally Posted by jasonsmith

Instead of using modeling clay to fill the gap. What about just using a Boom Mat and cutting it down to fit?

Because most midrange car audio speakers are meant for IB applications

Dec 5, 2011 | 09:27 PM

#13

jasonsmith

Joined: Oct 2011

Posts: 163

Quote:

Originally Posted by Milhouse

Because most midrange car audio speakers are meant for IB applications

I was referring to using it more just as a gasket to help close off the gap. i.e. cut the back off and use just enough to seal the speaker to the face of the baffle and fill the gap.

Dec 13, 2011 | 09:57 AM

#14

NovaSS369

Joined: Jun 2010

Posts: 392

From: Des Moines, Iowa

or get the little 2 pack of I think 12"x12" dynamat sheets from Best Buy. I plan on getting the full door ones but its an option for those who don't want all the work and time into doing full doors

Dec 15, 2011 | 08:21 PM

#15

Milhouse

Joined: Oct 2010

Posts: 654

Quote:

Originally Posted by jasonsmith

I was referring to using it more just as a gasket to help close off the gap. i.e. cut the back off and use just enough to seal the speaker to the face of the baffle and fill the gap.

Oh, I see. That would work so long as your gap is slightly smaller than the height of that baffle material, and is consistent all the way around the speaker.