Installed 3" ZZP DP and......
#1
Installed 3" ZZP DP and......
Hey there folks I have a problem, I had recently had installed a 3" ZZP catless DP, i left the resonator and mufflers stock, it has a decent sound buttttt, it seems like its misfiring, when i left off the gas as it shifts it sounds like there is a ammount of air coming out at a very fast pace, hence the misfiring sound, do I need to remove the resonator to get rid of this problem or...
#4
Hey Deadsnake - not to change the subject, but Rockenback Chevy in Grayslake is having a free show this Sat morning. It says classic cars, but I'm going anyway with the red Monte. My fiance will either take his 92 IROC Z or if he can get his 69 Chevelle's starter working, he will take that. I think its going to more of a gathering than an actual show - meaning no judging. It sounds like a fun time.
#5
Misfire sound, or backfire sound??
If a piece of your exhaust isn't bolted up properly it can suck in colder air during your deceleration and cause a popping sound.
I would say your downpipe hasn't been bolted up properly, or tightly enough. Or that a gasket isn't working properly?
If a piece of your exhaust isn't bolted up properly it can suck in colder air during your deceleration and cause a popping sound.
I would say your downpipe hasn't been bolted up properly, or tightly enough. Or that a gasket isn't working properly?
#6
Trey the guy at the muffler shop did it so i suppose they are? lol
Awesome, i had to buy new gaskets yes but they didnt seem that great...they were very thin the gaskets i had received with the DP were alot thicker and one was even metal, reason i did not have those installed was because i did not see them in the box before i went to get the DP installed, maybe thats the problem??? Idk, but I have to take it back to the shop this week, as for saturday, what time? I think i can stop by, i have work at 3 in round lake so it shouldnt be that bad
Awesome, i had to buy new gaskets yes but they didnt seem that great...they were very thin the gaskets i had received with the DP were alot thicker and one was even metal, reason i did not have those installed was because i did not see them in the box before i went to get the DP installed, maybe thats the problem??? Idk, but I have to take it back to the shop this week, as for saturday, what time? I think i can stop by, i have work at 3 in round lake so it shouldnt be that bad
#9
Keep us posted on what ends up being the problem. A d/p shouldn't cause that problem.
Is the IROC Z the Dodge Daytona IROC?
Is the IROC Z the Dodge Daytona IROC?