2013 updates to my Monte
#1
2013 updates to my Monte
Hey here are some quick pics I still beed to shoot a new walk around video maybe this weekend . But here are my updates I had my Mosconi 6to 8 aluminum case water jetted so I could do plexi and install Leds had it etched with the knights crest so that turned out cool and I installed my Orange Halos in my rims I have to say if I was not Blazed SS before I am now !! The burn out looks like my rim is on FIRE !!! and lastly here are some pics during the day at a IASCA car audio show from last weekend the rims look sic even in the day . Enjoy !!
Thanks for looking !!
Just Added 4-4-2013 and I don't want to hear no Crap about how dirty the car is !! I took the tire off just to show How I did it.
Every this is soldered and has heat shrink and then taped and wire loomed blah secured every 8" blah Water proof Grommet but some wanted to see how I did it .Sorry I have not painted anything yet I made everything by had for the mounting of it so it is what it is for now.
Here is a quick vid I shot last night it's only 57 seconds but you will get the idea until I get it back out when its NOT raining out. run in 1080 p
Thanks for looking !!
Just Added 4-4-2013 and I don't want to hear no Crap about how dirty the car is !! I took the tire off just to show How I did it.
Every this is soldered and has heat shrink and then taped and wire loomed blah secured every 8" blah Water proof Grommet but some wanted to see how I did it .Sorry I have not painted anything yet I made everything by had for the mounting of it so it is what it is for now.
Here is a quick vid I shot last night it's only 57 seconds but you will get the idea until I get it back out when its NOT raining out. run in 1080 p
Last edited by Blazed SS; 04-04-2013 at 10:10 AM.
#7
This is the first question I get with these because the car is not moving but if i am rolling slow it is easy to see that the rim moves but the light stays still.
So it is just regular 12 volt leds that are attached to a 15" halo inside the 17" rims the Halo is mounted to the dust cover on the back side of the caliper in 3 locations (so the don't turn or move or flex at speed tested them up to 100mph ) and then I ran the wire from the halo to the body and then each one back to the trunk to my relay and remote brain is.
So it is just regular 12 volt leds that are attached to a 15" halo inside the 17" rims the Halo is mounted to the dust cover on the back side of the caliper in 3 locations (so the don't turn or move or flex at speed tested them up to 100mph ) and then I ran the wire from the halo to the body and then each one back to the trunk to my relay and remote brain is.
Last edited by Blazed SS; 04-03-2013 at 01:28 PM.
#8
This is the first question i get with these because the car is not moving but if i am rolling slow it is easy to see that the rim moves but the light stays still.
So it is just regular 12 volt leds that are attached to a 15" halo inside the 17" rims the Halo is mounted to the dust cover on the back side of the caliper in 3 locations (so the don't turn or move or flex at speed tested them up to 100mph ) and then I ran the wire from the halo to the body and then each one back to the trunk to my relay and remote brain is.
So it is just regular 12 volt leds that are attached to a 15" halo inside the 17" rims the Halo is mounted to the dust cover on the back side of the caliper in 3 locations (so the don't turn or move or flex at speed tested them up to 100mph ) and then I ran the wire from the halo to the body and then each one back to the trunk to my relay and remote brain is.
#9
Thats what I have now but I will get some today after work and post them up in this thread.
I will jack it up and take 1 of the tires off
I will jack it up and take 1 of the tires off
Last edited by Blazed SS; 04-03-2013 at 01:28 PM.