what size carb for me - Monte Carlo Forum - Monte Carlo Enthusiast Forums

Engine/Transmission/Performance Adders Chat about your engine, transmission, nitrous, superchargers, turbos, and tuning.
Sponsored by:
Sponsored by:

what size carb for me

Reply

 
 
 
  #1  
Old 02-11-2018, 09:40 PM
Thread Starter
Join Date: Nov 2017
Posts: 26
Red face what size carb for me

block is a 327 casting number 3892657 from 1967, came in a z28 camaro & camaro & as a crate motor - i was told ours is the crate version
heads casting number 10088113 from 88+ 350, aluminum, 58cc angle plug, raised d port exhaust, 1.94"/1.5" valves
intake casting number 14057053 from an 78-85 305/350 ,aluminum ,qjet ,from pass,camaro,truck

not sure what it has for a cam


when i bought the parts car it came in there was a holley 4011 650cfm in the trunk and a qjet on it

this motor will be going into my 87 ls ( some PO converted it i to a SS clone )

PO thought the motor made 300hp+
just wondering what size carb you guys suggest, my FIL thinks a 600-625 is lots, I want to put a Demon on it
 

Last edited by Cwcb08; 02-11-2018 at 09:57 PM.
Reply With Quote
  #2  
Old 02-11-2018, 09:53 PM
Join Date: Nov 2017
Location: Isanti, MN
Posts: 582
Default

I would think a 625 -650cfm carb would be a good choice without knowing cam specs. Have used a Demon on a roller cam 350 with good results but prefer Holley myself.
 
Reply With Quote
  #3  
Old 02-13-2018, 09:12 AM
Join Date: Feb 2009
Location: lakeland fl
Posts: 2,418
Default

I agree with Jeff02rwdss go from there that carb he mentioned is a good one in my opinion
 
Reply With Quote
  #4  
Old 02-14-2018, 09:50 AM
Thread Starter
Join Date: Nov 2017
Posts: 26
Default

thanks guys
 
Reply With Quote
Reply
 
 
 


Thread Tools
Search this Thread
Advertising
Featured Sponsors
Vendor Directory