Finally Supercharged
Thread Starter
|
Monte Of The Month -- October 2012
Joined: Dec 2010
Posts: 2,886
From: Ames, IA
Finally Supercharged
A look of my engine bay on Thursday night:
After
Installed ZZP's SS M90 Supercharger Kit, and polished aluminum F-body valve covers. It was a lot of fun and I really enjoyed tearing it down. Most work I had ever done prior to this was headers/intake/oil changes and other simple stuff so this was pretty far in for me!
Install was fairly straight forward if you understand how all of the components of the kit work and function. I must say the included instructions sucked! ZZP seriously needs a good write up on this. My friend has a great camera that would have taken awesome photos but we didn't want to stop after every bolt for a pic so we only took a few.
Had some troubles with some of the included bolts (kind of expected this after the crap I had already gone through with zzp). I had to buy a few bolts for the fuel rails. Also had to buy new o-rings for the fuel rails because they weren't included. And to top that off, I had to but new lower intake manifold gaskets since they were also not included as I previously thought. Could have probably had it all done in less than 12 hours assuming I would have had EVERYTHING.
Regardless I'm very happy with how the kit performs. I got the Stage 2 which includes #33 injectors and a 3.8" SS pulley. Pulls pretty damn good (compared to what I'm used too. of course)
Here's some pics. I'm going to clean up the wiring, etc. and get some finished product photos tonight
Contents of the Kit (minus supercharger)
Supercharger back from ZZP, finally they sent me the right one
A little bit removed
Finally getting exciting!
Valve covers before
Got the front polished up. They're even cleaner now
Here's a video of the first start up More pics to come!
After
Installed ZZP's SS M90 Supercharger Kit, and polished aluminum F-body valve covers. It was a lot of fun and I really enjoyed tearing it down. Most work I had ever done prior to this was headers/intake/oil changes and other simple stuff so this was pretty far in for me!
Install was fairly straight forward if you understand how all of the components of the kit work and function. I must say the included instructions sucked! ZZP seriously needs a good write up on this. My friend has a great camera that would have taken awesome photos but we didn't want to stop after every bolt for a pic so we only took a few.
Had some troubles with some of the included bolts (kind of expected this after the crap I had already gone through with zzp). I had to buy a few bolts for the fuel rails. Also had to buy new o-rings for the fuel rails because they weren't included. And to top that off, I had to but new lower intake manifold gaskets since they were also not included as I previously thought. Could have probably had it all done in less than 12 hours assuming I would have had EVERYTHING.
Regardless I'm very happy with how the kit performs. I got the Stage 2 which includes #33 injectors and a 3.8" SS pulley. Pulls pretty damn good (compared to what I'm used too. of course)
Here's some pics. I'm going to clean up the wiring, etc. and get some finished product photos tonight
Contents of the Kit (minus supercharger)
Supercharger back from ZZP, finally they sent me the right one
A little bit removed
Finally getting exciting!
Valve covers before
Got the front polished up. They're even cleaner now
Here's a video of the first start up
More pics to come!
Last edited by 01 Monte SS; Jul 28, 2012 at 03:30 PM.
Outstanding! I love the look of the polished blower.