Engine/Transmission/Performance Adders Chat about your engine, transmission, nitrous, superchargers, turbos, and tuning.

Coolant leak

Thread Tools
 
Search this Thread
 
  #1  
Old 10-15-2014, 03:13 PM
Jfiedler88's Avatar
Thread Starter
Join Date: Oct 2014
Posts: 1
Default Coolant leak

I have a 2001 Monte Carlo 3.8 motor. I have a coolant leak and I recently found a puddle of coolant just below the crankshaft position sensor. It doesn't look like its coming from the water pump. I can't get underneath the car to see if there's any hoses it could be leaking from. The puddle of coolant is in this bowl looking thing with a bolt on it idk what it's actaully called. The car never over heats it just constantly looses coolant. Does anyone know where this is coming from? Email me at jfiedler0895@gmail.com or text me at 732-966-5384 if you can help I'd really appreciate it. I can also email anyone a picture of the puddle
 
  #2  
Old 10-15-2014, 03:27 PM
Join Date: Jul 2008
Location: Beach`in Florida
Posts: 33,585
Default

Welcome to the Monte Carlo Family

Sorry about your leak, but I find in problems like this is difficult to give a good answer without being able to inspect.

My best advice is to find a garage with a lift & good lighting to inspect.

How many miles on your Monte Carlo ? Do you know how old the hoses are ? You could have it pressure tested or dye put in to find the leak.

Please check back to see what our expert mechanical member's post on your problem > Good Luck <
 
  #3  
Old 10-15-2014, 06:59 PM
Aerocoupe86's Avatar
Monte Of The Month -- November 2016
5 Year Member
3 Year Member1 Year Member
Join Date: May 2013
Location: NC
Posts: 279
Default

Take a good look at the plastic coolant elbows that are in the belt tensioner housing. If you don't know where I'm talking about, just follow the hoses where they come out of the firewall and you will see em. They are common to crack and let antifreeze seep.
Not a hard or expensive repair but very common .
 
  #4  
Old 10-15-2014, 07:08 PM
Join Date: Jul 2008
Location: Beach`in Florida
Posts: 33,585
Thumbs up >Thanks<

Originally Posted by Aerocoupe86
Take a good look at the plastic coolant elbows that are in the belt tensioner housing. If you don't know where I'm talking about, just follow the hoses where they come out of the firewall and you will see em. They are common to crack and let antifreeze seep.
Not a hard or expensive repair but very common .


Thanks Member Aerocoupe86 for your post/infor & helping our new member MCF = Member helping Member

Super Super 4th Gen 86 Aerocoupe Monte
 
  #5  
Old 10-16-2014, 03:24 PM
STUMPMI's Avatar

Monte Of The Month -- February 2013
5 Year Member
3 Year Member1 Year Member
iTrader: (1)
Join Date: Dec 2011
Location: Taylor Michigan
Posts: 9,944
Default

Originally Posted by Aerocoupe86
Take a good look at the plastic coolant elbows that are in the belt tensioner housing. If you don't know where I'm talking about, just follow the hoses where they come out of the firewall and you will see em. They are common to crack and let antifreeze seep.
Not a hard or expensive repair but very common .

Agreed!
 
  #6  
Old 10-16-2014, 11:09 PM
Join Date: May 2013
Location: Jacksonville,Florida
Posts: 359
Default

yep! what he said I had the same issue replace with aluminum elbows
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MonteSquarlo
New Member Area
2
12-16-2012 06:18 PM
2000LS
Engine/Transmission/Performance Adders
0
01-28-2008 08:00 PM
autonoz
Monte Carlo Repair Help
9
12-28-2006 12:27 AM
orthokneepa
Monte Carlo Repair Help
4
09-14-2006 07:59 PM
greg fell
Monte Carlo Repair Help
10
07-19-2006 10:59 PM



Quick Reply: Coolant leak



All times are GMT -5. The time now is 10:27 PM.