Engine/Transmission/Performance Adders Chat about your engine, transmission, nitrous, superchargers, turbos, and tuning.

1970 Monte carlo

Old May 8, 2016 | 10:48 PM
  #1  
Gbrammer's Avatar
Thread Starter
|
Joined: May 2016
Posts: 5
Default 1970 Monte carlo

I have a 1970 Monte Carlo I'm taking the old 350/300 hp engine out and replacing it with sbc 400 with 180 afr heads scorpion roller rockers and a lunati 60102 cam with duration 219/227. Lift 469/489

I'm wondering how will this car react turbo 350 trans and car geared 2.73 and with 255 /15 tires


Is 4.11 swapp in the future. Turbo 350 have a high 1st gear of 2.52 my intake and carb are air gap and holly 650 double pump
 
Old May 9, 2016 | 02:28 PM
  #2  
BeachBumMike's Avatar
Joined: Dec 2005
Posts: 16,095
From: SpaceCoast, Florida
Default

Originally Posted by Gbrammer
I have a 1970 Monte Carlo I'm taking the old 350/300 hp engine out and replacing it with sbc 400 with 180 afr heads scorpion roller rockers and a lunati 60102 cam with duration 219/227. Lift 469/489

I'm wondering how will this car react turbo 350 trans and car geared 2.73 and with 255 /15 tires


Is 4.11 swapp in the future. Turbo 350 have a high 1st gear of 2.52 my intake and carb are air gap and holly 650 double pump

Welcome to the MCF What's the condition of your 350 trans ?
How many miles on the trans ? Did you do any upgrades to it ?
2.73 is a high rear gear & the 4.11 will sure help launch

Are you building for the strip ? or street & strip ?
Check back to see what our Member's post on your thread. Would like to see pictures of your Monte + updates.

Good Luck on getting your Monte the way your want it to `be
 
Old May 9, 2016 | 06:09 PM
  #3  
Gbrammer's Avatar
Thread Starter
|
Joined: May 2016
Posts: 5
Default

Thanks for reply. Trans has 95k miles on it
I do have 4l70 and torque converter if trans pukes. I bought it for another engine 480 hp ls3 but sold it stuck with computers and other goodies

The cam is equal to 350/350 hp hopefully I can get it rolling

I thought on 3.73 3.91 or 4.11 I just want to have strong car sounds great but not a dragster
 
Old May 10, 2016 | 04:27 PM
  #4  
BeachBumMike's Avatar
Joined: Dec 2005
Posts: 16,095
From: SpaceCoast, Florida
Default

Originally Posted by Gbrammer
Thanks for reply. Trans has 95k miles on it
I do have 4l70 and torque converter if trans pukes. I bought it for another engine 480 hp ls3 but sold it stuck with computers and other goodies

The cam is equal to 350/350 hp hopefully I can get it rolling

I thought on 3.73 3.91 or 4.11 I just want to have strong car sounds great but not a dragster

95K miles on your trans can be OK if it hasn't been abused & has been serviced over the years.

Good sounds comes from a well tuned built engine. Do you have headers ? What type of exhaust ? Wish you good luck on getting your Monte the way you want it to `be...Keep us updated + pictures when time permits...
 
Old May 10, 2016 | 04:41 PM
  #5  
Gbrammer's Avatar
Thread Starter
|
Joined: May 2016
Posts: 5
Default

Thank you. Today we made some changes Taking out turbo 350 installing 4l70 I had laying around no miles on it plus computer and torque converter. Header wise long tube 1/3/4 with 2/1/2 pipe. Still undecided on 3.73 or 3.91 with limited slip diff. I tried picture no luck yet to transfer
 
Old May 10, 2016 | 04:55 PM
  #6  
BeachBumMike's Avatar
Joined: Dec 2005
Posts: 16,095
From: SpaceCoast, Florida
Default

Thanks for your update... Sounds like a good plan...Your exhaust system sounds strong...+ a posi is always a good investment. Rear gear is another decision on how you will drive your Monte Carlo ? Low gear or 4.11 + are good for a 1/4 mile, but not that great on long highway trips. Is your Monte going to be your daily driver ?

Looking forward (as you are) to getting it the way you want it to `be >>>>Good Luck<<<<<

 
Old May 10, 2016 | 05:17 PM
  #7  
BeachBumMike's Avatar
Joined: Dec 2005
Posts: 16,095
From: SpaceCoast, Florida
Talking When you hit the Lotto or rob a Bank

 
Old May 10, 2016 | 07:02 PM
  #8  
Gbrammer's Avatar
Thread Starter
|
Joined: May 2016
Posts: 5
Default

No it is one of 15 vehicles
 
Old May 13, 2016 | 01:22 PM
  #9  
Gbrammer's Avatar
Thread Starter
|
Joined: May 2016
Posts: 5
Default

Ok new update added 1/3/4 headers and Eaton lsd . I project with afr 180 heads headers 650 double pump Holley lunati 60102 cam with roller rockers pushing 355 horsepower with 4l70 automatic od.
 


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:36 PM.