it has started! Painting my engine cover!! (AGAIN) buahaha
Hey, 03limitedss!
If you have a moment, would you mind telling me what you used for masking off the main area when you first laid down black, then when you masked off the center area & laid white? Masking tape? Masking paper? There had to be a semi-special tape to assist in the colors NOT bleeding into each other, right?
Also, you stated you used high temp Rust Oleum's clear to finish off everything, but besides the duplicolor, what did you use for the black & white?
Did you just lay a few light coats/layers on at a time until you got the desired coverage, or did you start with laying it on rather thick from the start? I suppose that goes for any of the colors - black, white, clear ...
In approximately 3 weeks I am storing my 2003 SS for the winter, & am going to strip it of a ton of things for a bunch of collective winter projects to have to keep me busy, busy, busy, & painting the engine was going to be one of them, I just happened to be fortunate to join MCFcom & found this great thread started by you.
So it goes without saying that anything you could take a few minutes & pass on to me, & to anyone else that will read this in the future, will be greatly appreciated.
Be good,
Zeke
'11
If you have a moment, would you mind telling me what you used for masking off the main area when you first laid down black, then when you masked off the center area & laid white? Masking tape? Masking paper? There had to be a semi-special tape to assist in the colors NOT bleeding into each other, right?
Also, you stated you used high temp Rust Oleum's clear to finish off everything, but besides the duplicolor, what did you use for the black & white?
Did you just lay a few light coats/layers on at a time until you got the desired coverage, or did you start with laying it on rather thick from the start? I suppose that goes for any of the colors - black, white, clear ...
In approximately 3 weeks I am storing my 2003 SS for the winter, & am going to strip it of a ton of things for a bunch of collective winter projects to have to keep me busy, busy, busy, & painting the engine was going to be one of them, I just happened to be fortunate to join MCFcom & found this great thread started by you.
So it goes without saying that anything you could take a few minutes & pass on to me, & to anyone else that will read this in the future, will be greatly appreciated.
Be good,
Zeke
'11
Hey, 03limitedss!
If you have a moment, would you mind telling me what you used for masking off the main area when you first laid down black, then when you masked off the center area & laid white? Masking tape? Masking paper? There had to be a semi-special tape to assist in the colors NOT bleeding into each other, right?
Also, you stated you used high temp Rust Oleum's clear to finish off everything, but besides the duplicolor, what did you use for the black & white?
Did you just lay a few light coats/layers on at a time until you got the desired coverage, or did you start with laying it on rather thick from the start? I suppose that goes for any of the colors - black, white, clear ...
In approximately 3 weeks I am storing my 2003 SS for the winter, & am going to strip it of a ton of things for a bunch of collective winter projects to have to keep me busy, busy, busy, & painting the engine was going to be one of them, I just happened to be fortunate to join MCFcom & found this great thread started by you.
So it goes without saying that anything you could take a few minutes & pass on to me, & to anyone else that will read this in the future, will be greatly appreciated.
Be good,
Zeke
'11
If you have a moment, would you mind telling me what you used for masking off the main area when you first laid down black, then when you masked off the center area & laid white? Masking tape? Masking paper? There had to be a semi-special tape to assist in the colors NOT bleeding into each other, right?
Also, you stated you used high temp Rust Oleum's clear to finish off everything, but besides the duplicolor, what did you use for the black & white?
Did you just lay a few light coats/layers on at a time until you got the desired coverage, or did you start with laying it on rather thick from the start? I suppose that goes for any of the colors - black, white, clear ...
In approximately 3 weeks I am storing my 2003 SS for the winter, & am going to strip it of a ton of things for a bunch of collective winter projects to have to keep me busy, busy, busy, & painting the engine was going to be one of them, I just happened to be fortunate to join MCFcom & found this great thread started by you.
So it goes without saying that anything you could take a few minutes & pass on to me, & to anyone else that will read this in the future, will be greatly appreciated.
Be good,
Zeke
'11
For the masking I just used 1" Scotch blue painters tape and regular printer paper lol
Gotta improvise with what u have :p
I used Rust o leums HIGH HEAT paint and clear
Sprayed down 2 light coats of each and finally a heavy coat to finish it up
it also dries up pretty quick Goodluck
i got three coats on it. no sanding at all was done since it was new anyway, i used duplicolor perfect match and clear also
ur very welcome
its all good man
sounds good, post pics when u do!
sounds good, post pics when u do!
i got my spare engine cover the other day. hoping it comes out as good as yours did. i am currently trying to figure out what color scheme i want
i am currently trying to figure out what color scheme i want
