How-To: Fourth Gen. Monte Carlo SS Rear Spoiler Installation w/ Pictures
[PLACE HOLDER THREAD]
Since through the years, I have written a few guides for forums. Here's my contribution: Synopsis: This Guide/Walk-Through will show the step-by-step process of installing a Monte Carlo SS Rear Spoiler onto forth gen. CL and SS cars. Tools Required: SS 10mm (inner 4) and 7/16 (outer 2) socket. Electric/Air Ratchet (find one borrow one, will make it 300% easier) CL>>SS Hole Saw (to make the stud accessible) Drill and 3/8 Drill Bit (to drill the stud holes) How-To: As you know SS deck lids will have the accessibility for the 6 studs/nuts that hold the spoiler in place. Two are [what I call] outer. Three are inner. [picture] CL deck lids will possibly have all accessible holes or like mines: [picture] These are my measurements. (Apparently the deck is some off number, because the holes/stud location are not entirely equidistant.) http://img.photobucket.com/albums/v2...mensions-3.jpg (I am currently doing this now installation on my car now, just got a decent used spoiler in and thought to give a step by step for everyone. Should not take me long. I want to re-paint the spoiler flat black first and find my hole saw) |
You should put this in the how-to section.
|
He can't, but I can. Moved it.
|
Whoops! Excuse me guys and thanks for move.
|
All times are GMT -5. The time now is 10:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands