Monte Carlo Forum - Monte Carlo Enthusiast Forums - For Sale: A whole bunch of stuff

I have all this stuff piling up in my garage, most of it stock parts. They're all in working condition unless otherwise stated. Prices are w/o shipping and negotiable. L26 specific parts have 16k or 20k on them. And if you need a part off the parts listed let me know and we can work something out. Pics upon request.

Stock Parts:

2 - L26 Head sets complete $75 each
4 - L26/L36 LIM (3 with T-stat housings) $50 w/tstat $40 w/o
3 - L26 UIM $100 each
1 - L36 UIM painted red $75
3 - L26 Fuel rails w/injectors $75 each
1 - L36 Fuel rail w/injectors $60
2 - Stock L26/L36 cams $25
2 - timing covers w/oil pressure and sensors $50 each
3 - Water pumps $25 each
4 - WP pulleys $10 (1 set of bolts for sure and can probably find 2 more sets if needed)
1 - Aluminum L26 oil pan $75
1 - L26 Back engine cover
2 - L26 Harmonic Balancer $50 each
1 - L36 Harmonic Balance $40
1 - Tensioner assembly with coolant elbows $65
1 - L67 idler pulley bracket and pulley(no bolt) $35
2 - L36/L26 evap canisters with vac lines $50 each
2 - L26 electronic Throttle bodies $75 each
2 - oil dipstick tubes with sticks $25 each
2 - sets of stock rockers $45 each set
3 - Rocker pedestal sets $20 each
3 - Lifter guide sets $20 each
1 - set of lifters $35
2 - sets of pushrods $30 each
3 - L26/L36 timing sets $35 each
4 - Crank sensors $40 each
4 - ICM/Crank harnesses $35 each (1 has cut wires on the crank sensor I think)
1 - BBV $25
1 - Series III L26 engine cover $50
1 - Inner tie rod $25
2 - Timing chain tensioners $25 each
1 - L26 T-stat harness $25
2 - Knock sensors $25 each
1 - Knock sensor harness $20
2 - L26/L36 ICM $50 each
6 - L26/L36 coil packs $20 each
2 - L26 EGR complete $75 each
4 - L26/L36 valve cover sets (1 new paint red w/silver stripes $75, 1 old dirty red paint $35, 1 stock black $40, 1 stock grey $40)

And atleast 3 of every engine bracket possible.....if you need it ask me.

Oh and I have a huge tupperware bin full of bolts....exhaust, intake, timing cover, TC, you name it, I can probably find it. I also have 6 comp rocker bolts I think possibly more.

Performance:

1 - L36 Hulkspeed heads ported by the Peck-man himself, with ZZP oversized intake and stock sized exhaust SI valves, 90# LS6 springs, titanium locks, and viton seals((dirty as hell though)) $150
1 - ZZP hybrid GT1/GT2 cam(can get the spec card it had the GT1 lift and duration with the GT2 LSA) $100
1 - R/T offroad 3" to 2.5" w/bung hole(no hardware((gasket or bolts))) $100

Probably have some more lying around too, I though I had an old HVII lying around somewhere, I found the hardware kit for it.

....holy **** I'm a hoarder