door pins and bushings, PLEASE HELP!!
#1
door pins and bushings, PLEASE HELP!!
Ok guys, im going crazy, i took my door off to replace the pins and bushings on my 78 monte i just bought today and i cant get the old pins and bushings out, how do you do this? does anybody have a diagram or an installation guide or anything? thanks in advance
#4
RE: door pins and bushings, PLEASE HELP!!
first off make your life easier dont take the door off, use a punch and suport the door andknock them out with good hammer or a air hammer, by doing it this way you dont have to realing everything back up so much
to get them out find a long puch and knock them out with big hammer
also you can heat them up and use ice to kool just the pin not the whole hinge andtheyshuld losen enough to knock them out eaier
sorry typing with a cast on your arm SUX!!!!!
to get them out find a long puch and knock them out with big hammer
also you can heat them up and use ice to kool just the pin not the whole hinge andtheyshuld losen enough to knock them out eaier
sorry typing with a cast on your arm SUX!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
DenaliZO6
Engine/Transmission/Performance Adders
7
02-15-2013 05:51 AM